The activated carbon filter generally 304 stainless steel, carbon steel, because the activated carbon adsorption CL oxidants and metal ions, in the micropores of bacteria and chemical corrosion of the tank, to the rubber lining anticorrosion so generally activated carbon filter.

Activated carbon is a very fine carbon particle per unit area has a large microporous, usually we call him capillary hole. This capillary has a strong adsorption capacity, due to the large surface area of carbon particles, in full contact with impurities in water. These impurities can be adsorbed in the micropores, thus removing impurities such as colloidal water. Activated carbon can adsorb CL io...

There are several kinds of activated carbon filters and determining which filter will work best for you is actually not that complicated. If you would like to learn more about the proper treatment of your application, our technicians are more than willing to find a solution. Please contact us for more information through this process.

Activated carbon adsorbs. The chemical process of absorption is commonly compared to a sponge soaking up water. The water is fully integrated into the sponge, notbeing limited to the surface area. Differently, adsorption is a process whereby molecules stick to the surface area only. As mentioned above, activated carbon has a large surface area due to being a porous material. The unwanted substance...

Activated carbon adsorbs. The chemical process of absorption is commonly compared to a sponge soaking up water. The water is fully integrated into the sponge, notbeing limited to the surface area. Differently, adsorption is a process whereby molecules stick to the surface area only. As mentioned above, activated carbon has a large surface area due to being a porous material. The unwanted substance...

Carbons capacity for chemicals depends on many things. The molecular weight of the chemical being removed, the concentration of the chemical in the stream being treated, other chemicals in the treated stream, operating temperature of the system and polarity of the chemicals being removed all affect the life of a carbon bed. Your General Carbon representative will be able to provide you with an exp...

Carbon is typically used in a column contactor. The columns are called adsorbers and are designed specifically for air and water. The design is engineered for loading (amount of fluid per area cross section), contact time (a minimum contact time is needed to insure required removal) and pressure drop through the adsorber (needed to size container pressure rating and fan/pump design rating). The st...

Carbon is typically used in a column contactor. The columns are called adsorbers and are designed specifically for air and water. The design is engineered for loading (amount of fluid per area cross section), contact time (a minimum contact time is needed to insure required removal) and pressure drop through the adsorber (needed to size container pressure rating and fan/pump design rating). The st...

Carbon is typically used in a column contactor. The columns are called adsorbers and are designed specifically for air and water. The design is engineered for loading (amount of fluid per area cross section), contact time (a minimum contact time is needed to insure required removal) and pressure drop through the adsorber (needed to size container pressure rating and fan/pump design rating). The st...

The first decision for using carbon is to treat a liquid or vapor stream. Air is best treated using large particles of carbon to reduce the pressure drop through the bed. Smaller particles are used with liquid applications to reduce the distance the chemicals have to travel to be adsorbed inside the carbon. Whether your project treats vapor or liquid, there are different sized carbon particles ava...

There are two different ways to make activated carbon but for this article we will provide you with the more efficient way that will create higher quality and purer activated carbon. Activated carbon is made by being placed in a tank without oxygen and subjecting it to extremely high temperatures, 600-900 degrees Celsius.Afterwards, the carbon is exposed to different chemicals, commonly argon and ...

The first decision for using carbon is to treat a liquid or vapor stream. Air is best treated using large particles of carbon to reduce the pressure drop through the bed. Smaller particles are used with liquid applications to reduce the distance the chemicals have to travel to be adsorbed inside the carbon. Whether your project treats vapor or liquid, there are different sized carbon particles ava...

There are two different ways to make activated carbon but for this article we will provide you with the more efficient way that will create higher quality and purer activated carbon. Activated carbon is made by being placed in a tank without oxygen and subjecting it to extremely high temperatures, 600-900 degrees Celsius.Afterwards, the carbon is exposed to different chemicals, commonly argon and ...

Here at General Carbon, we carry activated carbon made from bituminous coal, lignite coal, coconut shell and wood.

Organic chemicals are attracted to carbon the best. Very few inorganic chemicals will be removed by carbon. The molecular weight, polarity, solubility in water, temperature of the fluid stream and concentration in the stream are all factors that affect the capacity of the carbon for the material to be removed. VOCs such as Benzene, Toluene, Xylene, oils and some chlorinated compounds are common ta...

Activated carbon is a highly porous substance that attracts and holds organic chemicals inside it. The media is created by first burning a carbonaceous substance without oxygen which makes a carbon “char”. Next the “char” is treated chemically or physically to develop an interconnected series of “holes” or pores inside the carbon. The great surface area of this internal pore network results in an ...

Activated carbon attracts organic chemicals from vapor and liquid streams cleaning them of unwanted chemicals. It does not have a great capacity for these chemicals,but is very cost effective for treating large volumes of air or water to remove dilute concentrations of contamination. For a better perspective,when individuals ingest chemicals or are experiencing food poisoning, they are instructed ...

Activated carbon attracts organic chemicals from vapor and liquid streams cleaning them of unwanted chemicals. It does not have a great capacity for these chemicals,but is very cost effective for treating large volumes of air or water to remove dilute concentrations of contamination. For a better perspective,when individuals ingest chemicals or are experiencing food poisoning, they are instructed ...

Most people have a misunderstanding that there is a difference between activated carbon and activated charcoal. Both of these terms can and are used interchangeably.As well, activated carbon is another similar word used for activated carbon and activated charcoal. All of these phrases are synonymous and commonly found in our field.

solvent recovery, waste water treatment, ultrapure water purification, air purification, clean room filters semiconductor industry, automotive interior environment purification, catalyst supports, fine chemicals and refining, column vectors, etc.

The spherical activated carbon (SAC) is a high sphericity activated carbon with pitch as raw material. In addition to excellent absorption properties, its melt molding process characteristics make it different from ordinary wood or coal based spherical and granular activated carbon molding by an adhesive .

The product is mainly used in all kinds of gas adsorption. It can remove harmful substances in the air, be loaded in gas masks and other equipments. It can also be used as catalyst or carrier in synthesis industry.

Activated carbon made from coconut shells is the best activated carbon used for drinking water purification, chlorine removal, algae removal, oxygen absorption, catalytic carrier .It can also be used in water purification equipment, such as water purifier, filter stuffing, and so on.

Drinking water purificationWater and wastewater purificationFood IndustryMaple Syrup productionHydrogen productionReef aquariumsWindow cleaning

Coal--Broken--Measuring blending--Screen--Carbonized--Activated--Sieve and pack--Activated-Crushed activated carbon

Coal--Broken--Measuring blending--Screen--Carbonized--Activated--Sieve and pack--Activated-Crushed activated carbon

replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.

First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and th...

After you confirm our PI, we will request you to pay. T/T and L/C,Paypal, Western Union are the most usual ways we are using.

You can contact us by email about your order details, or place order on line.

Quality is priority. My company always attaches great importance to quality controlling from the very beginning to the very end.

We’d like to supply samples free of charge, but you need pay for the freight fees.

It is made from high quality TaiXi Coal, wood charcoal, coconut shell charcoal, anthracite charcoal,bamboo charcoal etc. Specifications can be upon customized request.

Our factory is located in Ningxia Province,China which has rich coal.All our clients, from home or abroad, are warmly welcome to visit us.